Marshall Excelsior MEGR230 and MEGR230-90 Single Stage 9″WC Regulator

• MEGR-230 Single Stage 9WC Specs PDF

**To maximize the lifespan of the regulator, it must be installed above the liquid level of propane: directly connect to service valve, or wall mount above the propane cylinder(s).

• Straight Vent – #3934
• 90° Vent – No Stock #

Features/Specifications:

• Type: Single Stage
• Orifice Diameter: .059 Dia
• BTU Capacity: 140,000 BTU (based on 25 PSI inlet @ 9” W.C. delivery pressure)
• Max. Inlet Pressure: 250 PSI
• Inlet Connection: 1/4” FNPT
• Outlet Connection: 3/8” FNPT
• Exterior Finish: Green Wet Coat
• Diaphragm: Molded with O-Ring Bonnet / Body Seal
• Diaphragm Type: Internal Relief – Spring Loaded
• Bonnet / Body Material: Die Cast Aluminum
• Listings: LISTED / UL 144
• Mounting Holes: 3-1/2” On Center

The MEGR-230 single-stage regulators are approved for use in small portable applications and outdoor cooking appliances ulitizing low pressure.

NOTE: Single-stage regulators are not approved for RV use per NFPA 1192