Enquiries: 604-421-3108 | info@propanedepot.ca
Marshall Excelsior MEGR6120 Series High Pressure Regulators
**To maximize the lifespan of the regulator, it must be installed above the liquid level of propane: directly connect to service valve, or wall mount above the propane cylinder(s).
Features/Specifications:
- Type: Adjustable or Fixed / PSI
- Max. Inlet Pressure: 250 PSIG (17,2 bar)
- Inlet Connection: 1/4” FNPT
- Outlet Connections: 1/4” FNPT
- Gauge Port: 1/4” FNPT
- Exterior Finish: Red Wet Coat
- Diaphragm: Fabric Reinforced Buna N
- Body/ Bonnet Material: Die Cast Aluminum
- Liquid Capacity: 3-5 GPH
- Listings: UL LISTED / UL 144
The MEGR-6120 Series are UL LISTED high-pressure regulators that meet a variety of applications for liquid or vapor
service. The compact body design makes these regulators particularly useful in installations with space limitations. The basic
MEGR-6120 Series regulators come equipped with a handwheel adjustment. The non-adjustable ME6121 Series provides a
tamper-resistant spring case and one of seven fixed setpoints: 5, 10, 20, 30, 40, 50, or 60 PSI.
The MEGR-6120 & MEGR-6121 Series are UL listed as high pressure, non-relief regulators. Both MEGR-6120 & MEGR-6121 Series
regulators contain brass materials that are not compatible with anhydrous ammonia service.
Marshall Excelsior MEGR-164 Series Commercial Regulators
**To maximize the lifespan of the regulator, it must be installed above the liquid level of propane: directly connect to service valve, or wall mount above the propane cylinder(s).
Features/Specifications:
- Type: Adjustable/PSI
- Max. Inlet Pressure: 250 PSI
- Inlet Connection: 1/2” FNPT or 3/4” FNPT
- Outlet Connection: 1/2” FNPT or 3/4” FNPT
- Exterior Finish:Gray Urethane
- Regulator Spring: Steel
- Stem Guide/Disk Holder: Stainless Steel
- Diaphragm: Fabric Rienforced Nitrile (NBR)
- Bonnet / Body Material: Cast Aluminum
- Vent: Non-Relieving
The MEGR-164 Series adjustable high-pressure regulators offer a wide selection of available pressure ranges. High pressure regulators are typically used to reduce tank pressure to an intermediate pressure for use by another regulator. They may be used as high pressure regulators on distribution systems when used in conjunction with first-stage down stream regulators. When equipped with an integral relief valve (MEGR-164SR
Series), the regulator may be used as a final-stage regulator on high pressure systems. It may also be used as a first-stage regulator when set at 10 PSIG (0,69 bar) or less. The 1/4”-inch FNPT tapped side outlet can be used to install a pressure gauge or a hydrostatic relief valve. This series contains brass materials that are not compaƟ ble with anhydrous ammonia service.
Marshall Excelsior MEGR-1632E 2PSI Twin Stage Regulator
Marshall Excelsior 2PSI Regulators Spec PDF
**To maximize the lifespan of the regulator, it must be installed above the liquid level of propane: directly connect to service valve, or wall mount above the propane cylinder(s).
Features/Specifications:
- Type: Integral Two-Stage 2 PSI
- Max. Inlet Pressure: 250 PSIG
- Exterior Finish: White Powder Coat
- Orifice Size: .17” (Compact) & 7/32” (Full)
- Seat Material: Fluorocarbon (FKM)
- Diaphragm: Fabric Reinforced NBR/Molded Lip O-Ring Bonnet/Body Seal
- Relief Type: Internal Relief – Spring Loaded
- Bonnet / Body Material: Die Cast Aluminum
- Listings: C ULUS / UL 144
- Mounting Holes: Standard 3-1/2” Center
- Pressure Taps: #54 Orifi ce 1/8” FNPT Plugged (3)
- Relief Travel Stop: Molded in Adjustment Cap –
Gray (Compact), Black (Full Size)
MEC Excela-Flo integral two-stage regulators combine the first and second stage regulator set-up into one convenient unit converting tank pressure to 2 PSI. All MEC integral two-stage 2 PSI regulators are white indicating 2 PSI outlet pressure. Integral two-stage 2 PSI regulators are recommended for installations with short piping distances, but provide the same advantages of two-stage regulation with a single unit. 2 PSI service regulators are used in conjunction with an LPG line regulator either at the indoor appliance or a remote manifold distribution header inlet. All MEC integral two-stage regulator vent have tapped ports (7/16 -24 – First Stage) (3/8” FNPT or 3/4” FNPT – Second Stage) and our exclusive E-Z Grip screens located over the outlet. Both the MEGR-1232E and MEGR1632E series offer optimal relief performance that well exceeds UL test requirements providing over pressure protection of no more than 4 PSI downstream pressure. MEC Excela-Flo integral two-stage domesƟ c regulators feature a 25 year recommended replacement life, our exclusive Tri-TapTM (tank, 10 PSI, 2 PSI) pressure port system and tear away leak check adhesive sticker.
Fisher R652E 2 PSI Second Stage Regulator
Fisher 2 PSI Regulators Specs PDF
**To maximize the lifespan of the regulator, it must be installed above the liquid level of propane: directly connect to service valve, or wall mount above the propane cylinder(s).
Types R622E and R652E, Two-psi Service Regulators, are designed for Two-psi LP-Gas Regulator Systems and listed by Underwriters Laboratories (UL®). These units are installed downstream from a First-Stage regulator and reduce an inlet pressure of 10 psig / 0.69 bar to a nominal 2 psig / 0.14 bar outlet pressure. Two-psi Service Regulators are designed for domestic applications that supply 2 psig / 0.14 bar LP-Gas to a line regulator located inside the building. In most cases a manifold is used with corrugated stainless steel tubing (CSST) as well as other acceptable piping materials for routing to the line pressure regulator supplying approximately 11 inches w.c. / 27 mbar to appliance regulators. Types R622E and R652E Two-psi Service Regulators feature a combination relief valve and large vent that provide overpressure protection and exceed UL requirements. Both units have a stainless steel inlet screen to reduce the amount of debris from entering them. Fisher® brand Types R622E and R652E are painted green with a white closing cap for easy identification and have a temperature rating of -20 to 160ºF / -29 to 71ºC, but have passed Fisher internal testing for lockup, relief start-to-discharge and reseal down to -40ºF / -40ºC.
Type R622E
Time proven design constructed of corrosion resistant materials, the Type R622E is designed to provide a recommended replacement life of 20 years. Fisher brand’s fabric reinforced diaphragm and large diaphragm area provide accurate regulation at increased capacities. All components provide superior resistance to fi eld conditions that may cause wear and corrosion. Built-in 1/8-inch taps (orificed to a number 54-drill size) on the
upstream and downstream sides allow for easy gas system checks.
Type R652E
Provides the same features as the Type R622E, includes a 20-year recommended replacement life with a back mount design.
Rego Twin Stage Regulators
- LV404B34 and LV404B39 Series
- LV404B4 and LV404B9 Series
Rego LV404B34 and LV404B39 Compact Twin Stage Regulators Specs
Rego LV404B4 and LV404B9 Twin Stage Regulators Specs
**To maximize the lifespan of the regulator, it must be installed above the liquid level of propane: directly connect to service valve, or wall mount above the propane cylinder(s).
LV404B4 and LV404B9 Features/Specifications:
- Incorporates integral relief valve.
- With 15 PSIG inlet pressure, regulator is designed to not pass more than 2 PSIG with the seat disc removed
- Large vent helps prevent blockage and has ¾” F. NPT for vent piping
- Compact size allows for easy installation — especially under container hoods and within collars
- Vent on the first stage is consistently in the down position
- Built in pressure taps on both first and second stage regulators have plugged ⅛” F.NPT outlets. Plugs can be removed with a 3⁄16” hex allen wrench
- Select brown finish
LV404B34 and LV404B39 Features/Specifications:
- Large vent helps prevent vent blockage, the second stage regulator bonnet is tapped for ⅜”F.NPT for vent piping, the high pressure regulator is tapped with ⅛” F.NPT for vent piping
- With 15 PSIG inlet pressure, the regulator is designed to not pass more than 2 PSIG downstream with the seat disc removed.
- Incorporates an integral relief valve on second stage
- Unique bonnet vent profile minimizes vent freeze over when properly installed
- Compact design saves space allows for easy installation – especially under container hoods with collars
- Built in pressure taps 1/8” F.NPT on both high pressure regulator inlet and downstream side of the second stage regulator
- Plugs can be removed with a 3/16” hex Allen wrench
- Select brown finish
Rego Second Stage Regulators
Rego LV4403B66RA Second Stage Regulator Specs
Rego LV5503B Second Stage Regulators Specs
Rego LV4403B Second Stage Regulators Specs
**To maximize the lifespan of the regulator, it must be installed above the liquid level of propane: directly connect to service valve, or wall mount above the propane cylinder(s).
Features/Specifications:
- Large vent helps prevent blockage and has ¾” F.NPT for vent piping.
- With 15 PSIG inlet pressure, regulator is designed to not pass more than 2 PSIG with the seat disc removed.
- Incorporates integral relief valves.
- Replaceable valve orifice and valve seat disc.
- Straight line valve closure reduces wear on seat disc.
- Unique bonnet vent profile minimizes vent freeze over when properly installed.
- Large molded diaphragm is extra sensitive to pressure changes.
- Built in pressure tap has plugged 1⁄8″ F.NPT outlet. Plug can be removed with a 3⁄16″ hex allen wrench.
- Select brown finish.
Marshall Excelsior Second Stage Regulators
- MEGR-1222, MEGR-1252, MEGR-1622 & MEGR-1652
Marshall Excelsior Second Stage Regulator Specs PDF
Features/Specifications:
- Type: Second Stage
- Max. Inlet Pressure: 10 PSIG
- Exterior Finish: Green Powder Coat
- Interior Finish: Green Powder Coat
- Orifice Size: .14” (Compact) & 7/32” (Full)
- Diaphragm: Fabric Reinforced (NBR) Molded Lip O-Ring Bonnet/Body Seal
- Relief Type: Internal Relief – Spring Loaded
- Bonnet / Body Material: Die Cast Aluminum
- Seat Material: Fluorocarbon (FKM)
- Listings: C US / UL 144
- Mounting Holes: Standard 3-1/2” Center
- Pressure Taps: #54 Orifi ce 1/8” FNPT Plugged (2)
- Relief Travel Stop: Molded In Adjustment Cap –
Black (Full Size), Gray (Compact)
Marshall Excelsior First Stage Regulators
- MEGR-1122H – Compact Series
- MEGR-1622H – Full Size Series
Marshall Excelsior First Stage Regulators Specs
**To maximize the lifespan of the regulator, it must be installed above the liquid level of propane: directly connect to service valve, or wall mount above the propane cylinder(s).
- No stock #
Features/Specifications:
- Type: First Stage
- Max. Inlet Pressure: 250 PSIG
- Exterior Finish: Red Powder Coat
- Interior Finish: Red Powder Coat
- Orifice Size: .15” (Compact) & 7/32” Full
- Diaphragm: Fabric Reinforced NBR Molded Lip O-Ring Bonnet/Body Seal
- Relief Type: Internal Relief – Spring Loaded
- Bonnet / Body Material: Die Cast Aluminum
- Seat Material: Fluorocarbon (FKM)
- Listings: C US / UL 144
- Mounting Holes: Standard 3-1/2” Center
- Pressure Taps: #54 Orifi ce 1/8” FNPT Plugged (2)
- Relief Travel Stop: Molded in Adjustment Cap –
Propane Depot is closed on public holidays.
VANCOUVER LOCATION
Propane Filling/Cylinder Sales
Ph: 604-872-0800
1940 Main St
Vancouver, BC V5T 3B9
Mon-Fri: 8 am – 6 pm
Sat: 9 am – 6 pm
Sun: 10 am - 6 pm
BURNABY LOCATION
Showroom, Filling, Cylinder Sales
Ph: 604-421-3108
Toll-Free: 1-877-238-1279
3390 Lake City Way
Burnaby, BC V5A 3A6
Mon-Fri: 7 am - 6 pm
Sat: 9 am – 6 pm
Sun: 10 am – 6 pm
OUTSIDE SALES, RENTALS
LARGE PROJECTS
sales@propanedepot.ca
Ph: 236-998-0042
ACCOUNTING
Accounting: 604-564-0364
Receivables
receivables@propanedepot.ca
Payables
payables@propanedepot.ca