Line Pressure Regulators

Buy 2 – 10% off
Buy 3 – 15% off
Buy 4 or more – 20% off

We have two types of regulator at Propane Depot:

Governor Line Pressure Regulator

Pietro Fiorentini’s GOVERNOR line of gas regulators are designed to comply with the latest CSA and international standards for regulators suitable for indoor and outdoor installations with no modifications.

The GOVERNOR family of regulators are ideal for a wide range of residential through large industrial applications. The materials and soft parts used in the construction of the GOVERNOR regulators make them suitable for use with natural gas, LPG, Propane air and all other non-corrosive gases.

Governor Line Pressure Regulator

Features

  • CSA 6.22a-2005 ANSI Z21.80A2005 Class I for
  • outlet pressures up to 14” W.C. Certified
  • Integral Vent Limiter
  • External Vent Limiter — no vent line required*
  • Positive dead-end lockup
  • Inlet and Outlet test port
  • 500 to 1 Turndown
  • Minimum Δ P – 1” W.C.

Read the Specs


N5 Line Pressure Regulator

The NMT® N5 Series gas regulator is an ANSI Z21.80 certified self-operating regulator with a vent limiting option for use in residential, commercial, and industrial applications. The N5 vent allows for indoor use without the need to pipe external vent lines. With the added benefit of extended corrosion resistance, the N5 allows for various applications where the best regulation performance is required.

Features

  • Certified CSA 6.22/ ANSI Z21.80 Line Pressure Regulators
  • Vent Limiter Option
  • Multi-Position Installation
  • Extended Corrosion Resistance
  • Up to 15 PSIG Operating Pressure

Read the Specs


 

kgeismar

Fisher 630 Series Commercial Direct-Operated High Pressure Regulators

Fisher 630 Series Commercial Direct-Operated High Pressure Regulator Specs
Fisher 630 Series Commercial Direct-Operated High Pressure Regulator Brochure

 

UL LISTED

**To maximize the lifespan of the regulator, it must be installed above the liquid level of propane: directly connect to service valve, or wall mount above the propane cylinder(s).

630 Series Features/Specifications:

  • High-Pressure Capabilities
  • Rugged Construction
  • Better Low-Pressure Control
  • Sour Gas Service Capability

Body Size and End Connection Styles

NPS 1 and 2 / DN 25 and 50 with an end connection of NPT, ASME CL150 RF, CL300 RF, or CL600 RF
Maximum Inlet Pressure
1500 psig / 103 bar
Maximum Outlet Pressure
Up to 500 psig / 34.5 bar
Outlet Pressure Range
3 to 500 psig / 0.21 to 34.5 bar in 10 ranges
Pressure Registration
Internal
Temperature Capabilities
Nitrile (NBR), Nylon (PA), and Neoprene (CR): -20 to 180°F / -29 to 82°C
Fluorocarbon (FKM) and Perfluoroelastomer (PTFE): 0 to 300°F / -18 to 149°C
Approximate Weights
1-inch End Connection: 25 Pounds / 11.3 kg
2-inch End Connection: 30 Pounds / 13.6 kg

 

 

Alex Sherry

Fisher 627 Series Commercial Direct-Operated High Pressure Regulators

Fisher 627 Series Direct Operated High Pressure Regulators Specs
Fisher 627 Series Direct Operated High Pressure Regulators Brochure

 

UL LISTED

**To maximize the lifespan of the regulator, it must be installed above the liquid level of propane: directly connect to service valve, or wall mount above the propane cylinder(s).

627 Series Features/Specifications:

  • Internal Relief Valve
  • Types 627R and 627MR Travel Stop
  • Relief Operation Indicator
  • Easy to Maintain
  • Installation Adaptability
  • Application Versatility
  • Tamper-Resistant
  • Wide Range of Flow Capabilities

 

Body Sizes and End Connection Styles

3/4, 1, or 2: NPT end connections
NPS 1 or 2 / DN 25 or 50: CL150 RF, CL300 RF, CL600 RF flanged end connections
Maximum Inlet Pressure
NPT Steel: 2000 psig / 138 bar
Flanged Steel: 1500 psig / 103 bar
Ductile Iron: 1000 psig / 69,0 bar
Outlet Pressure Range
5 to 500 psig / 0,34 to 34,5 bar in six ranges
Pressure Registration
Type 627, 627H or 627R: Internal 
Type 627M, 627HM or 627MR: External through 1/4 NPT internal control line connection in the diaphragm case
Temperature Capabilities
-20° to 180°F / -29° to 82°C
Approximate Weights
Ductile Iron or Steel Casings: 10 pounds / 5 kg
Aluminum Casings: 6.3 pounds / 3 kg

 

 

Alex Sherry

Marshall Excelsior MEGR6120 Series High Pressure Regulators

UL LISTED

**To maximize the lifespan of the regulator, it must be installed above the liquid level of propane: directly connect to service valve, or wall mount above the propane cylinder(s).

Features/Specifications:

  • Type: Adjustable or Fixed / PSI
  • Max. Inlet Pressure: 250 PSIG (17,2 bar)
  • Inlet Connection: 1/4” FNPT
  • Outlet Connections: 1/4” FNPT
  • Gauge Port: 1/4” FNPT
  • Exterior Finish: Red Wet Coat
  • Diaphragm: Fabric Reinforced Buna N
  • Body/ Bonnet Material: Die Cast Aluminum
  • Liquid Capacity: 3-5 GPH
  • Listings: UL LISTED / UL 144

The MEGR-6120 Series are UL LISTED high-pressure regulators that meet a variety of applications for liquid or vapor
service. The compact body design makes these regulators particularly useful in installations with space limitations. The basic
MEGR-6120 Series regulators come equipped with a handwheel adjustment. The non-adjustable ME6121 Series provides a
tamper-resistant spring case and one of seven fixed setpoints: 5, 10, 20, 30, 40, 50, or 60 PSI.
The MEGR-6120 & MEGR-6121 Series are UL listed as high pressure, non-relief regulators. Both MEGR-6120 & MEGR-6121 Series
regulators contain brass materials that are not compatible with anhydrous ammonia service.

Alex Sherry

Rego 1580V Commercial Regulators

UL LISTED

**To maximize the lifespan of the regulator, it must be installed above the liquid level of propane: directly connect to service valve, or wall mount above the propane cylinder(s).

Features/Specifications:

  • Large nozzle and straight through flow provides high capacity and
    resistance to freeze-up.
  • O-ring on retainer assembly provides a dampening effect to
    reduce vibration.
  • Suitable for both liquid and vapor service.
  • Can be readily fitted with pressure gauge in ¼” F. NPT port.
  • Materials
    Body ………………………………………………………….. Forged Aluminum
    Bonnet …………………………………………………….. Die Cast Aluminum
    Spring …………………………………………………………………………. Steel
    Valve Seat Discs …………………………………………… Resilient Rubber
    Diaphragms …………………. Integrated Fabric and Synthetic Rubber

Designed to reduce LP-Gas and anhydrous ammonia container  pressures to between 3 and 125 PSIG. Precision-built with a multi-million BTU capacity, the 1580V series is perfect for such big, tough jobs as crop dryers, asphalt batch mixing plants, road building “tar wagons”, heat treating and other large industrial and commercial loads. It’s also ideal as a first stage regulator in large multiple operations. The AA1580V series is ideal for use in anhydrous ammonia applications such as blue print machines and heat treating.

 

 

Alex Sherry

Marshall Excelsior MEGR-164 Series Commercial Regulators

UL LISTED

**To maximize the lifespan of the regulator, it must be installed above the liquid level of propane: directly connect to service valve, or wall mount above the propane cylinder(s).

Features/Specifications:

  • Type: Adjustable/PSI
  • Max. Inlet Pressure: 250 PSI
  • Inlet Connection: 1/2” FNPT or 3/4” FNPT
  • Outlet Connection: 1/2” FNPT or 3/4” FNPT
  • Exterior Finish:Gray Urethane
  • Regulator Spring: Steel
  • Stem Guide/Disk Holder: Stainless Steel
  • Diaphragm: Fabric Rienforced Nitrile (NBR)
  • Bonnet / Body Material: Cast Aluminum
  • Vent: Non-Relieving

The MEGR-164 Series adjustable high-pressure regulators offer a wide selection of available pressure ranges. High pressure regulators are typically used to reduce tank pressure to an intermediate pressure for use by another regulator. They may be used as high pressure regulators on distribution systems when used in conjunction with first-stage down stream regulators. When equipped with an integral relief valve (MEGR-164SR
Series), the regulator may be used as a final-stage regulator on high pressure systems. It may also be used as a first-stage regulator when set at 10 PSIG (0,69 bar) or less. The 1/4”-inch FNPT tapped side outlet can be used to install a pressure gauge or a hydrostatic relief valve. This series contains brass materials that are not compaƟ ble with anhydrous ammonia service.

Alex Sherry

Marshall Excelsior MEGR-1632E 2PSI Twin Stage Regulator

Marshall Excelsior 2PSI Regulators Spec PDF

UL LISTED

**To maximize the lifespan of the regulator, it must be installed above the liquid level of propane: directly connect to service valve, or wall mount above the propane cylinder(s).

Features/Specifications:

  • Type: Integral Two-Stage 2 PSI
  • Max. Inlet Pressure: 250 PSIG
  • Exterior Finish: White Powder Coat
  • Orifice Size: .17” (Compact) & 7/32” (Full)
  • Seat Material: Fluorocarbon (FKM)
  • Diaphragm: Fabric Reinforced NBR/Molded Lip O-Ring Bonnet/Body Seal
  • Relief Type: Internal Relief – Spring Loaded
  • Bonnet / Body Material: Die Cast Aluminum
  • Listings: C ULUS / UL 144
  • Mounting Holes: Standard 3-1/2” Center
  • Pressure Taps: #54 Orifi ce 1/8” FNPT Plugged (3)
  • Relief Travel Stop: Molded in Adjustment Cap –
    Gray (Compact), Black (Full Size)

 

MEC Excela-Flo integral two-stage regulators combine the first and second stage regulator set-up into one convenient unit converting tank pressure to 2 PSI. All MEC integral two-stage 2 PSI regulators are white indicating 2 PSI outlet pressure. Integral two-stage 2 PSI regulators are recommended for installations with short piping distances, but provide the same advantages of two-stage regulation with a single unit. 2 PSI service regulators are used in conjunction with an LPG line regulator either at the indoor appliance or a remote manifold distribution header inlet. All MEC integral two-stage regulator vent have tapped ports (7/16 -24 – First Stage) (3/8” FNPT or 3/4” FNPT – Second Stage) and our exclusive E-Z Grip screens located over the outlet. Both the MEGR-1232E and MEGR1632E series offer optimal relief performance that well exceeds UL test requirements providing over pressure protection of no more than 4 PSI downstream pressure. MEC Excela-Flo integral two-stage domesƟ c regulators feature a 25 year recommended replacement life, our exclusive Tri-TapTM (tank, 10 PSI, 2 PSI) pressure port system and tear away leak check adhesive sticker.

Alex Sherry

Fisher R652E 2 PSI Second Stage Regulator

Fisher 2 PSI Regulators Specs PDF

 

UL LISTED

**To maximize the lifespan of the regulator, it must be installed above the liquid level of propane: directly connect to service valve, or wall mount above the propane cylinder(s).

Types R622E and R652E, Two-psi Service Regulators, are designed for Two-psi LP-Gas Regulator Systems and listed by Underwriters Laboratories (UL®). These units are installed downstream from a First-Stage regulator and reduce an inlet pressure of 10 psig / 0.69 bar to a nominal 2 psig / 0.14 bar outlet pressure. Two-psi Service Regulators are designed for domestic applications that supply 2 psig / 0.14 bar LP-Gas to a line regulator located inside the building. In most cases a manifold is used with corrugated stainless steel tubing (CSST) as well as other acceptable piping materials for routing to the line pressure regulator supplying approximately 11 inches w.c. / 27 mbar to appliance regulators. Types R622E and R652E Two-psi Service Regulators feature a combination relief valve and large vent that provide overpressure protection and exceed UL requirements. Both units have a stainless steel inlet screen to reduce the amount of debris from entering them. Fisher® brand Types R622E and R652E are painted green with a white closing cap for easy identification and have a temperature rating of -20 to 160ºF / -29 to 71ºC, but have passed Fisher internal testing for lockup, relief start-to-discharge and reseal down to -40ºF / -40ºC.

Type R622E

Time proven design constructed of corrosion resistant materials, the Type R622E is designed to provide a recommended replacement life of 20 years. Fisher brand’s fabric reinforced diaphragm and large diaphragm area provide accurate regulation at increased capacities. All components provide superior resistance to fi eld conditions that may cause wear and corrosion. Built-in 1/8-inch taps (orificed to a number 54-drill size) on the
upstream and downstream sides allow for easy gas system checks.

Type R652E

Provides the same features as the Type R622E, includes a 20-year recommended replacement life with a back mount design.

Alex Sherry

Propane Depot is closed on public holidays. 

VANCOUVER LOCATION

Propane Filling/Cylinder Sales
Ph: 604-872-0800
1940 Main St
Vancouver, BC V5T 3B9

mainst@propanedepot.ca

Mon-Fri: 8 am – 6 pm
Sat: 9 am – 6 pm
Sun: 10 am - 6 pm

BURNABY LOCATION

Showroom, Filling, Cylinder Sales
Ph: 604-421-3108
Toll-Free: 1-877-238-1279
3390 Lake City Way
Burnaby, BC V5A 3A6

info@propanedepot.ca

Mon-Fri: 7 am - 6 pm
Sat: 9 am – 6 pm
Sun: 10 am – 6 pm

DISPATCH AND TRANSPORT

Propane Deliveries
dispatch@propanedepot.ca
Ph: 604-314-2578


MOVIES & SPFX

Ph: 236-998-0042
sales@propanedepot.ca

OUTSIDE SALES, RENTALS
LARGE PROJECTS

sales@propanedepot.ca
Ph: 236-998-0042


ACCOUNTING

Accounting: 604-564-0364

Receivables
receivables@propanedepot.ca

Payables
payables@propanedepot.ca

Propane Depot | © 2025