The combustion process is completely isolated from the inside of the boat by the unique, direct vent design. A built-in blower provides good heat circulation. The heater is sold with all accessories needed including a stainless steel backing plate, 28 inches of flexible double stainless chimney and the deck fitting cap. A propane hose, 11” WC regulator and fittings are needed and sold separately.

Approximate cubic footage this unit will heat based on an average climate it’s installed in, the altitude being sea level and a well insulated area is 10’ x 10’ x 8’ = 800 cuft

Includes Everything Ready to Install!

• Easy to install – Easy to use.
• Stainless Steel burner.
• Large ceramic glass viewing window with safety screen.
• Safe, direct-vent operation.
• Unaffected by motion or wind.
• Variable heat output and excellent thermal efficiency.
• Low fuel consumption.
• Compact design, with attractive appearance, made of 304 stainless steel.
• No interior oxygen depletion

Width: 8.5″
Height: 14″
Depth: 5.5″
Weight: 22 lbs

Mounting Backplate:
W 8.375″ D0.650″ H23″

Fuel Consumption:
1 lb – 7 hrs
20lb – 140 hrs gal LOW
1 lb – 5 hrs
20lb – 100 hrs gal HIGH

Heat Output:
Low: 3,200 BTU
High: 4,500 BTU

Dickinson Newport P9P12 Installation Manual

Dickinson Newport P9000 Replacement Parts

The combustion process is completely isolated from the inside of the boat by the unique, direct vent design. A built-in blower provides good heat circulation. The heater is sold with all accessories needed including a stainless steel backing plate, 28 inches of flexible double stainless chimney and the deck fitting cap. A propane hose, 11” WC regulator and fittings are needed and sold separately.

Approximate cubic footage this unit will heat based on an average climate it’s installed in, the altitude being sea level and a well insulated area is 12’ x 12’ x 8’ = 1100 cuft

Includes Everything Ready to Install!

• Easy to install – Easy to use
• Stainless steel burner
• Large ceramic glass viewing window with safety screen.
• Safe, direct-vent operation
• Unaffected by motion or wind
• Variable heat output and excellent thermal efficiency
• Low fuel consumption
• Compact design, with attractive appearance, made of 304 stainless steel
• No interior oxygen depletion

Width: 10″
Height: 16″
Depth: 7.25″
Weight: 25 lbs

Mounting Backplate:
W 9.875″ D 0.650″ H 23″

Fuel Consumption:
1 lb – 5.5 hrs
20 lb – 110 hrs gal LOW
1 lb – 3.9hrs
20 lb – 78 hrs gal HIGH

Heat Output:
Low: 4,000 BTU
High: 5,500 BTU

Dickinson Newport P9P12 Installation Manual

Dickinson Newport P12000 Replacement Parts

The Island Grillstone™ opens the doors to the past, enabling everyday grillers and barbecue fanatics to experience the benefits of stone grilling.

Steeped in tradition and history, Island Grillstone is an innovative barbecue accessory made of naturally porous volcanic rock cut to fit most barbeques. Its unique properties allow The Island Grillstone™ to hold the natural flavor, moisture and nutrients in the food, while preventing flare-ups that cause charring.

Square #3912

The Square Island Grillstone, is favored for its ability to fit on most grills
and barbecues. Quarried out of volcanic rock and shipped straight to
your door, the Square Island Grillstone is ready to make you a master
chef.

WHAT IT CAN COOK
50 prawns, or 10 chicken breasts, or 100 asparagus

SPECIFICATIONS

One 12″ x 12″ x 3/4 ” Square Island Grillstone

Round #3913
for charcoal & keg style grills…

Grills come in all shapes and sizes, and so do our Island Grillstones! The Round
Grillstone is perfect for those round charcoal and keg style grills where a square just won’t
fit. The Round Grillstone is also great for cooking pizza and other round-shaped foods and
treats!

WHAT IT CAN COOK

One 12” pizza, or 10 pancakes, or 5 sandwiches

SPECIFICATIONS

One 14” Round Island Grillstone™

Rectangle #3914

For the portable, table-top grill folks

Grill on the go. The Rectangular Island Grillstone is perfect for the camper or fisher. Pull
out your portable grill and cook your freshly caught fish right on the boat if you want!

WHAT IT CAN COOK

12 sausages, or 3 salmon, or 7 kabobs

SPECIFICATIONS

One 7” x 12” Island Grillstone™

• #4876

Versa 50 Owner’s Manual

The Versa 50 makes it possible to cook at your camp site, on a boat, the beach, or the lakeshore. It combines a high-performance stainless steel cook surface with the flexibility to grill wherever you go. The smaller size version of the Versa 100, the Versa 50 is packed with many of Jackson Grills’ high quality features and perfect for limited space applications.

SPECIFICATIONS AND OPTIONAL ACCESSORIES

General Components

12V Solenoid – Advance Fuel Components Model 121 – #1297

Electric solenoids shut off the gas inside the locker with the flip of a switch that’s conveniently located in the cabin. Safe propane use means shutting off the gas at the tank after every use. You can do that manually by turning the knob on the tank; leaving the gas lines pressurized is not recommended. The solenoid makes it easy to cut the propane supply to the line. The switch should be paired with a bright panel light that warns you that the solenoid valve is open. The solenoid should always be off except when the stove is in use.

Pressure Gauges

A pressure gauge is an essential safety feature, and it must be the first thing connected to the valve on top of the bottle. It can be mounted directly on the bottle or installed on the locker wall and connected to the bottle with a high-pressure pigtail.

The gauge does not tell you the level of the gas in the tank; you weigh the tank to determine that. What the pressure gauge does do is allow you to easily–and frequently–leak test the LPG system.

Twin Stage Regulator

From the solenoid, the gas should flow directly into a step-down regulator that reduces the pressure from 250 psi on the tank side (this varies widely with temperature) to 11″WC in the line that carries the gas to the galley stove or other appliance. This order can be reversed, with the solenoid plumbed after the regulator, but low-pressure solenoids tend to be of lesser quality. A high-pressure solenoid is preferable because it shuts off the gas upstream of the regulator and the rest of the system. In application, either configuration shuts off the gas inside the locker. If you install your solenoid on the high-pressure side, be sure it is rated for high pressure.

Supply Hoses

The fuel line from the regulator (or solenoid valve) to the stove must be continuous–no connections inside the boat except at the stove. Solid copper fuel lines are commonly used, but flexible, high-pressure hose is probably safer for boat use, and it is easier to install.

A threaded adapter can be required to connect the hose to the regulator or solenoid. Use thread sealant on the regulator end of the adapter but not on the end that the hose attaches to. Pipe fittings require gas tape or sealant, but flare and compression fittings do not.

The hose should exit the propane locker near the top, and it should pass through a vapor-tight fitting to prevent gas from leaking out of the locker into the interior of the boat. Use a similar fitting to protect the hose from abrasion everywhere it passes through a bulkhead.

Common straight-through fittings are too short to pass through a plywood bulkhead. You can thin the bulkhead by counter boring one side with a spade bit. Alternatively, cut an oversize hole through the bulkhead with a hole saw, screw a metal or fiberglass cover plate over the hole, and install the fitting through the cover plate. Be sure to protect the hose from abrasion and excessive heat (140°F). LPG hose should run through the top of lockers rather than through their bottoms. Support the hose every 18 inches with nylon cable clamps.

Gas Detectors

Gas detectors add an additional level of safety to an LPG installation. “Sniffers” constantly monitor the air for the presence of LP gas, activating an alarm and shutting off the solenoid when they detect gas at about 10% of minimum explosive level.

Install the gas sensor where gas is likely to accumulate, i.e. as low as possible and near the range.

Recommended Cylinders

Vertical Aluminum cylinders: 6lb (currently not available at our store), 10lb, 20lb, 30lb, and 40lb (currently not available at our store)

Horizontal Aluminum cylinders: 10lb, 20lb, 30lb

– Rust-Free
– Lighter Than Steel
– Must Be Recertified Every 10 Years. We Recertify And Repair Aluminum Cylinders At Our Lake City Way Showroom Location.

Vertical Fiberglass/Composite Cylinders

– 50% Lighter Than Steel
– Translucent: Liquid Propane Level Visible
– 15 Year Lifespan, Must Be Recertified Every 5 Years. We Recertify And Repair Composite/Fiberglass cylinders at our Lake City Way Showroom Location.
– Rust-Free

• 4532

Features:

• 100% Stainless Steel
• Decorative Laser Cutting Designs
• Unique Look & High Quality Construction
• 1 set of Pot Holders & 1 Sea Rail included
• Removable Wooden Cutting Board

Specifications:

• Width: 23″
  Height: 4.75″
  Depth: 14″
  Weight: 26 lbs
• Heat Output:
  Left Burner – 11,000 BTU
  Right Burner – 7,000 BTU
• Counter Cut-out: W 22″ D 12.5″ H 5″

Dickinson 00-2BP 2 Burner Propane Drop In Cooktop Manual 2018

Dickinson 00-2BP 2 Burner Cooktop Troubleshooting

The Dickinson Spitfire180 barbeque has a sturdy construction with a fancy design. This model features side handles and a mirror finish stainless hood with a stainless front handle to allow for effortless opening and closing even when the barbeque is hot. Use with a 1 lb green disposable bottle of propane or hoses are available for larger propane tanks. The design also prevents flame outs in the windiest of conditions.

• Mirror finish 304 marine grade stainless lid
• Brushed finish 304 marine grade stainless body
• Sturdy construction for maximum strength
• Features a 10,000 BTU burner
• High strength octagonal design
• Thermally insulated silicon side handles.
• Roll away hood with front handle.
• Will not flame out in high winds.
• Attractive design and dock appeal
• One year warranty
• Three year burner warranty

The Spitfire180 Barbeque comes with deck legs, drip tray, 2 removable stainless grill sections, a spark igniter for easy lighting, a thermometer, a stainless latch to keep the hood closed while storing.

Black vinyl all weather cover included.

Width: 24″
Height: 13″
Depth: 14.75″
Weight: 25 lbs

Cooking Surface:
W 11″ x L 16″
BTU: 10,000 BTU

Spitfire 180 Manual

• 4531

The Dickinson Sea-b-que Large is the largest and most robust stainless boat barbecues on the market. Cooking for you and your friends was never more satisfying. This model features side handles and hood knobs on the rollaway hood to allow for effortless opening and closing even when the barbeque is hot. The design also prevents flame outs in the windiest of conditions.

• 20ga grained 304 marine grade stainless
• Sturdy construction for maximum strength
• Features a 11, 000 BTU burner
• High strength octagonal design
• Thermally insulated silicon side handles.
• Roll away hood with hood knobs
• Will not flame out in high winds.
• Attractive design and dock appeal
• One year warranty
• Three year burner warranty

The Sea-B-Que Large comes with deck legs, drip tray, 4 removable porcelain grill sections, a spark igniter for easy lighting, a thermometer and a stainless latch to keep the hood closed while storing.

Width: 28″
Height: 14.50″
Depth: 12.50″
Weight: 30 lbs

Cooking Surface:
W 11″ x L 20″
BTU: 11,000 BTU

Sea-B-Que Manual