Impco VFF-30 Lockoff

  • #2353

The Model VFF30 is a combination fuel lockoff and filter, engineered for use with LPG (liquid or vapor) or Natural Gas Vapor.  The VFF30 is suitable for engines up to 325 hp (242 kW) at a maximum working pressure of 312 psi (21.51 Bar). The extra large capacity filter element is fully serviceable

SPECIFICATIONS

Fuel Type ……………………………….. LPG Liquid/Vapor, Natural Gas Vapor
Inlet Pressure (maximum) …………. 312 psi (21.51 Bar)
Flow Rate ……………………………….. 26.7 CFM (12.6 L/s)
Operating Temperature Range…… -40°F to +250°F (-40°C to +121°C)
Filtration ………………………………….. 40 Micron
Vacuum Activation
Minimum Opening ………………. 0.50” w.c. (0.12kPa)
Fully Opened ……………………… 11.5” w.c. (2.86 kPa)
Minimum Operating Opening … 2.0” w.c.(0.50 kPa)
Mounting Position …………………….. Vertical (as shown above)

IMPCO VFF30 Lockoff Parts Breakdown

VFF-30 Rebuild Kit

VFF30 rebuild kit

IMPCO VFF-30 Rebuild Instructions

Alex Sherry

Beam T60 Regulator

  • T60ANNN – T60E IDLE&PRIMER- no vaccuum lockoff  – #1333
  • T60-AVP-N VAC.LOCK/IDLE PRIMER – has vaccuum lockoff – #1331

Note:There are 3 features available on the T60, Idle Feature, Vacuum Lock, & Manual Primer
The Primer & Idle are easy to determine, and for the Vacuum Lock if you look on the front cover there is a port that says VAC, you will either have a pipe plug in that port meaning there is no built in vacuum lock, or there will be a fitting with a small vacuum hose going to it meaning that you do have a built in vacuum lock, you will use that fitting & vacuum hose on your new T60

The T60 is a two stage regulator/vaporizer for LPG applications up to 60hp (45Kw). Various models feature
built-in vacuum lockoffs, idle adjustment, primers, various heating methods, and several mounting options.
Newly designed models (scheduled for spring 2010 production) include an improved primary and secondary
lever and seat design, and a standard freeze plug and idle screw. The idle screw has improved sensitivity and
stability and is relocated to the cover. An idle screw cap and tamper resistant screws satisfy regulatory tamper
resistance requirements. Optional dual mounting tabs are available and all mounting features and ports will
remain the same.

SPECIFICATIONS

Fuel Type …………………………………… LPG Liquid/Vapor or Natural Gas
Inlet Pressure
Maximum …………………………. 250 psi (17.23 Bar)
Minimum Inlet Pressure ……… 30 psi (207 kPa)
Outlet Pressure …………………………… -0.5” w.c. (-0.13 kPa)
HP/kW ……………………………………….. 60hp (45kW) with LPG liquid, 40hp (30kW) LPG Vapor
30hp (22kW) for Natural Gas
Operating Temperature Range ……… -40°F to +250°F (-40°C to +121°C)
Fuel Filtration ……………………………… 40 micron
Heating Chamber Source ……………… Required for liquid LPG
Mounting Position ………………………… Vertical (outlet down) recommended. Horizontal position
can be used when fuel contamination can be controlled
with HD-5 or HD-10 specified LPG fuel.
Diaphragm ………………………………….. Hydrin
Applications ………………………………… Stationary, mobile, industrial and automotive
Certification ………………………………… UL (AU1502), Inquire for specific ECE approval

BEAM Model T60 Regulator Parts Breakdown

Beam T60 Repair Kit – #1334

rebuild kit t60

Beam T60 Repair Kit Instructions

Alex Sherry

Impco Model CA300AM-4 Mixer

  • CA300AM-50-4 Non-Feedback Model – #2243

The Model 300A mixer is a single-diaphragm air valve for applications. It offers a down-draft air inlet that can be used for remote air filtration or open-element type air filters. This unit is available for LPG Vapor and Natural Gas applications with air flow requirements up to 348 CFM (164 L/s) or 432 CFM (204 L/s) depending on the part number. The 300A has numerous adapters to allow the installer to fit the 300A into most under hood vehicle applications. The Model 300A is also available for feedback applications with the ‘FB’ designation. The 300A can also be equipped with a cam mechanism to allow the air valve to be raised to its full open position to minimize any restriction in the base vehicle air stream. Optional air cleaner assemblies are also available for engines which require higher CFM air flow.

SPECIFICATIONS

Fuel Type ………………………………… LPG Vapor, Natural Gas
Operating Temperature Range …… -40°F to +250°F (-40°C to +121°C)
Diaphragm Material …………………… Hydrin (Standard), Silicone (Optional)
HP/(kW) (1 & 20) ………………………. 217 hp (161.8 kW) @ 348 CFM (164 L/s) w/1.5” Hg manifold
HP/(kW) (50 & 70) …………………….. 270 hp (201.3 kW) @ 432 CFM (204 L/s) w/1.5” Hg manifold
Certification ……………………………… UL (AU2317), Inquire for specific ECE approval

IMPCO Model 300A Carburetor Parts Breakdown

Alex Sherry

Impco Model CT425 Mixer

  • CT425M-2 Mixer – #2256
  • FT425M-2 Feedback Mixer – #2292

The Model 425 carburetor is a single-diaphragm air valve carburetor/mixer. It offers a down draft air inlet that can be used for remote air filtration or open-element type air filters. This unit is available for LPG Vapor and Natural Gas for applications requiring up to 460 CFM (217.1 L/s). The Model 425 is also available for feedback applications with the ‘FB’ designation. These FB mixers are available in a tamper resistant configuration, indicated by the “-CT” in the part number.

SPECIFICATIONS

Fuel Type …………………………………………….. LPG Vapor, Natural Gas
Inlet Pressure ……………………………………….. 8.0” w.c. Natural Gas/LPG Vapor
Operating Temperature ………………………….. -40°F to +250°F (-40°C to +121°C)
Mounting Position ………………………………….. Vertical
Diaphragm Material ……………………………….. Hydrin (Standard), Silicone (Optional)
Hp/kW …………………………………………………. 287hp (214kW) @ 460 CFM (217.1 L/s) and 1.5”
Hg manifold depression
333hp (248kW) @ 533 CFM (252L/s) and 2.0” Hg
manifold depression

IMPCO Model CT425 Carburetor Parts Breakdown

Alex Sherry

Impco Model CA225 Mixer

  • CA225M-2 Mixer – #2241
  • FB225M-2 Mixer – #2289 (feedback applications)

 

The Model 225 carburetor is a single-diaphragm air valve carburetor/mixer. It offers a down-draft air inlet that can be used for remote air filtration or open-element type air filters. This unit is available for LPG vapor or Natural Gas applications with air flow requirements up to 380 CFM (179.3 L/s). The Model 225 is also available for feedback applications with the ‘FB’ designation. Note: All DG model mixers reduce air flow by 30%. Two separate air valve vacuum supplies are available with this mixer. Additional low speed mixture control can be obtained to lean air/fuel mixtures with optional ring spacers/shims.

SPECIFICATIONS

Fuel Type …………………………………… LPG Vapor or Natural Gas
Inlet Pressure ……………………………… -1.5” w.c. (-0.37 kPa)
Operating Temperature Range ……… -40°F to +250°F (-40°C to +121°C)
Mounting Position ………………………… Vertical
Diaphragm Material ……………………… Hydrin (Standard), Silicone (Optional)
HP/kW ……………………………………….. 205 hp (153kW) @ 329 CFM (155 L/s) and 1.5” in Hg
manifold depression
237 hp (176.7 kW) @ 380 CFM (179.3 L/s) and 2.0” in Hg
manifold depression

IMPCO Model CA225 Carburetor Parts Breakdown

Alex Sherry

Impco Model CA125 Mixer

  • CA125M-2 Mixer – #2240

 

The Model 125 carburetor is a single-diaphragm air valve carburetor/mixer for applications requiring air flow up to 235 CFM (111 L/s). It offers a down draft air inlet that can be used for remote air filtration or open element type air filters. This unit is available for LPG Vapor and Natural Gas Vapor applications. The Model 125 is also available for feedback applications with the “FB” designation. Two separate air valve vacuum supplies are available with this mixer. Additional low speed mixture control can be obtained to lean air/fuel mixtures with optional shims.

SPECIFICATIONS

Fuel Type …………………………………… LPG Vapor or Natural Gas
Inlet Pressure ……………………………… -1.5” w.c. (-0.37 kPa)
Operating Temperature Range ……… -40°F to +250°F (-40°C to +121°C)
Mounting Position ………………………… Vertical
Diaphragm ………………………………….. Hydrin or Silicone
HP/kW ……………………………………….. 126 HP (94kW) @ 202 CFM (95 L/s) and 1.5” in Hg manifold
depression
146 HP (108.8kW) @ 235 CFM (111 L/s) and 2.0” in Hg
manifold depression

IMPCO Model CA125 Caburetor Parts Breakdown

Alex Sherry

Impco Model CA100M Carburetor

  • CA100-M3 #2238

Throttle Bodies Are Also Available, We Will Need The T2- Number Found On Your Throttle Body

The Model 100 Series is a single diaphragm air-gas valve carburetor mixer. It offers a 90° air inlet to provide low overhead clearance, and is available with several air horn and throttle body options. This unit is available for propane, natural gas and digester gas applications. The Model 100 is also available for Feedback applications with the ‘FB’ designation. The 100 mixer provides a convenient 1/8″ NPT balance port and two separate air valve vacuum ports. Additional low speed idle mixture control can be obtained to lean air fuel mixtures through the use of optional shims.

SPECIFICATIONS

Fuel Type …………………………………… LPG Vapor or Natural Gas
Inlet Pressure ……………………………… -1.5” w.c. (-0.37 kPa)
Operating Temperature Range ……… -40°F to +250°F (-40°C to +121°C)
Mounting Position ………………………… Vertical
Diaphragm Material ……………………… Hydrin or Silicone
HP/kW Rating ……………………………… 106 HP (79 kW) @ 170 CFM (80 L/s) and 1.5” in Hg manifold
depression
123 HP (91.7 kW) @ 197 CFM (93 L/s) and 2.0” in Hg
manifold depression

IMPCO Model CA100 Caburetor Parts Breakdown

Different Models

CA100M-1 Mixer: 1-1/2 inch Air Horn – no stock #
CA100M-2 Mixer: 1-7/8 inch Air Horn – no stock #
CA100M-3 Mixer: 2-1/16 inch Air Horn – #2238
CA100M-4 Mixer:  2-5/16 inch Air Horn – #2239

FT100M-30828-52-002 Spectrum Mixer, non-repairable – #3393

Alex Sherry

Impco Model CA55M-500 Carburetor

  • 2252

IMPCO’s CA55 model carburetors are offered in four design variations, providing proven, effective solutions for optimum metering and delivery of either LPG vapor or Natural Gas. The standard model can be mounted in either an updraft, downdraft, or side draft orientation, supplying either LPG or Natural Gas to engines up to 73 hp (1 to 54kW), with a flow rate of 118 CFM (55.7 L/s). Various SAE flanges and air horn sizes are available.

SPECIFICATIONS

Fuel Type …………………………………… LPG Vapor or Natural Gas
Inlet Pressure ……………………………… -1.5” w.c. (-0.37 kPa)
Operating Temperature Range ……… -40°F to +250°F (-40°C to +121°C)
Mounting Position ………………………… Vertical
Diaphragm Material ……………………… N/A
HP/kW Rating ……………………………… Up to 73 hp (54 kW) @ 118 CFM (55.7 L/s) and 2.0” in Hg manifold depression

IMPCO CA55-500L Carburetor Parts Breakdown

Alex Sherry

Propane Depot is closed on public holidays. 

VANCOUVER LOCATION

Propane Filling/Cylinder Sales
Ph: 604-872-0800
1940 Main St
Vancouver, BC V5T 3B9

mainst@propanedepot.ca

Mon-Fri: 8 am – 6 pm
Sat: 9 am – 6 pm
Sun: 10 am - 6 pm

BURNABY LOCATION

Showroom, Filling, Cylinder Sales
Ph: 604-421-3108
Toll-Free: 1-877-238-1279
3390 Lake City Way
Burnaby, BC V5A 3A6

info@propanedepot.ca

Mon-Fri: 7 am - 6 pm
Sat: 9 am – 6 pm
Sun: 10 am – 6 pm

DISPATCH AND TRANSPORT

Propane Deliveries
dispatch@propanedepot.ca
Ph: 604-314-2578


MOVIES & SPFX

Ph: 236-998-0042
sales@propanedepot.ca

OUTSIDE SALES, RENTALS
LARGE PROJECTS

sales@propanedepot.ca
Ph: 236-998-0042


ACCOUNTING

Accounting: 604-564-0364

Receivables
receivables@propanedepot.ca

Payables
payables@propanedepot.ca

Propane Depot | © 2025