Roofing: Torches and Accessories

Our Roofing/Torch section has a varied selection of Torches, Bells, Necks, complete Torch Kits, Hoses, Regulators, Replacement Parts, Fire Extinguishers, Roofer Liquid Torches, Kettle Torches, Liquid Regulators, Liquid hoses and more!

FEATURING QUICK DISCONNECT KIT
Sold in 3 Pack or individual Male and Female fittings!
Stock #3479

quick disconnect 3 pk roofers roofing torches


 

POL XS Flow Connections

XS Flow POL roofers torches accessories roofing torch excess flow

Comes in different flow rates:
– 0.9 GPM – Stock #2409
– 1.1 GPM – Stock #2641
– 1.8 GPM – Stock #3703

Sievert 

PROMATIC TORCHES

3366-97 (#3905)

Promatic is the most complete and advanced system in our product range. The patented piezo ignition, universal handle, accessories and advanced ergonomic design make Promatic a world leading system for all heating tasks where efficiency and professional workmanship are the most important requirements.

Sievert’s top of the line torch.

Accessories:
Promatic Detail Torch Neck and Burner – 3350-02 (#2902)
Promatic Torch Burner Tip – 3350-01 (#2901)
Promatic Field Burder – 3356-02 (#3929)
Neck tube support stand – 7172-40 (#2932)
Quick connect set (hose and handle) – 3200-01 (#2893)
U/L listed hand tightened regulator – 3062-93 (#2890)

PRO 88 SERIES

The Pro 88 series is used worldwide by professional roofers and waterproofing specialists.  With a complete power burner program, including Titanium torches, the Pro 88 is the ultimate torch system for heavy-duty tasks.

The Pro 88 series operates with propane and butane gases.

SIEVERT TORCH KITS

sievert cs4470 torch kit roofingCS4470 (#3387)

Sievert Turboroofer Combination Torch Kit Combination kit comes with two torches and quick connects for easy change out between the detail and field torch. Piezo ignition on the 3470-48 (32” Torch assembly with stand.
Comes with:
3444-47 – 18” Torch assembly with stand
3001-01 (#2887)– Quick connect for handle (2)
3002-01 (#2888)– Quick connect for hose
1525IS – 25 ft. U/L listed hose
3062-93 (#2820) – U/L listed hand tightened regulator
2000S (#2878) – Flint striker

sievert ti4661 torch kit roofing roofers

TI4460 (#2940)
Sievert Titanium Turboroofer Combination Torch Kit Combination kit comes with two titanium torches and quick connects for easy change out between the detail and field torch. The titanium torches are approximately 60% lighter than the steel versions.
Comes with:
3460-TI (#2906) – 32” Torch assembly with stand
3444-TI – 88,000 BTU Titanium detail torch assembly
3001-01 (#2887) – Quick connect for handle (2)
3002-01 (#2888) – Quick connect for hose
1525IS – 25 ft. U/L listed hose
3062-93 (#2890) – U/L listed hand tightened regulator
2000S (#2878) – Flint striker

sievert ti2960 torch kit roofers roofingTI2960 (#2939)
Sievert Titanium Turboroofer Field Torch Kit
The Titanium version of the popular PS2960 kit. High quality TA2
Titanium has excellent strength and is 60% lighter than steel.
Handle has dual control knobs for “complete” flame control.
Comes with:
3460-TI (#2906) – 32” Torch assembly with stand
1525IS – 25 ft. U/L listed hose
3062-93 (#2890) – U/L listed hand tightened regulator
2000S (#2878) – Flint striker

sievert ps2959 torch kit roofers roofingPS2959 (#3515)
Sievert Turboroofer Field Torch Kit Short
Same quality kit as PS2960 with the exception of the
3459-47 26’’ neck tube field torch.
Comes with:
3459-47 – 26” Torch assembly with stand
1525IS 25 ft. U/L listed hose
3062-93 (#2890) U/L listed hand tightened regulator
2000S (#2878) Flint striker
sievert ps3470-ti torch kit roofers roofingPS3470-TI (#3388)
Sievert Titanium Turboroofer Field Torch Kit
Popular kit that features a powerful, windstable flame.
Handle has dual control knobs for ”complete” flame control.
Piezo ignition.
Comes with:
3470-52 – 32” Torch assembly with stand and Piezo ignition
1525IS  25 ft. U/L listed hose
3062-93 (#2890) – U/L listed hand tightened regulator
sievert ti2959 torch kit roofers roofingTI2959 (#3517)
Sievert Titanium Turboroofer Field Torch Kit Short
Same quality kit as the TI2960, except 6” shorter.
Comes with:
3459-TI  – 26” Torch assembly with stand
1525IS – 25 ft. U/L listed hose
3062-93 (#2890) – U/L listed hand tightened regulator
2000S (#2878) – Flint striker

Roofing Torch Regulators

fisher st67-742 torch Regulator

Fisher 67CH-742 Torch Regulator
Stock #1750

Fisher 67C Series is an Underwriters Laboratories (UL) listed high-pressure regulators
that meets a variety of applications in liquid or vapor service. The compact body design makes the 67C Series particularly useful in installations with space limitations.

The highly accurate 67CD Series eliminates the need for a pressure gauge on portable applications by using calibrated scales on the spring case, allowing visual adjustment of outlet pressure. The non-adjustable 67CN Series provides a tamper-resistant spring case and one of three fixed set points: 10, 15, or 20 psi / 0,69; 1,0; or 1,4 bar.

Fisher 67C Series carries an UL listing as a high pressure, non-relief regulator. This series contains brass materials that are not compatible with anhydrous ammonia service.

Our torch set up with this regulator includes:
– Connector to Torch Hose (135-LB) – Stock #1086
1.8GPM POL with XS Flow – Stock #3703

Click the image for more information

primegrip 88-105 torch regulator

Primegrip Torch Regulator with Hose Failure
Stock #3883

The Hose Failure feature allows roofers to charge long hoses with vapor without activating the XS Flow device in the POL connection.

magnum er-300 torch regulator

Magnum ER-300 Torch Regulator
Stock #3480

  • Replacement regulator for Magnum torch kits
  • 1/4″ Left-Hand fittings
  • 30-60 PSI
  • No XS Flow POL Connection

SIEVERT REGULATORS

sievert regulators roofers roofing

 

 

 

 

 

 

LP Gas Regulators

High quality brass and steel construction. P.O.L. inlet for refillable
propane cylinder. LH 9/16” male outlet.
3062-93 (#2890) – U/L listed hand tightened regulator; 28-57 psi
3061-23 – Adjustable regulator; 15-60 psi
3091-23 – Preset regulator; 28 psi

sievert torch regulator 3063-13

3063-13 – Torch Regulator with Hose Failure
Stock #2891

A hose failure valve improves safety by cutting off gas flow in case of a hose rupture or gas leak. The hose connection rotates freely on the valve housing, which helps prevent the hose from becoming tangled.  Sievert hose failure valves are supplied separately (3054) or integrated in regulators (3063, 3083, 3092 and 3093).

For a Full Catalog of Sievert Products, click here.

 

Rothenberger

CSA Certified Torches

MAPP & Propane TORCH For Bottle
Gas Electric Ignition Piezo Gas Pressure Regulator Flame Regulator Works in any position

PRT-01 
Heat Up Torch , CSA Certified 180,000 btuh Heat-Up Burner, 34” OAL Propane Safety Handle with Pilot & Trigger

PRT-02
Detail Torch , CSA Certified 200,000 btuh Anti-Wind Burner, 21” OAL Propane Safety Handle with Pilot & Trigger

PRT-03
Field Torch , CSA Certified 260,000 btuh Anti-Wind Burner, 27” OAL Propane Safety Handle with Pilot & Trigger

Torch Kits Complete With Hose, Regulator with POL, Striker

Field Torch Kit (CSA Certified) Contains;
PRT-03 Torch, (260,000 btuh), 27″OAL With 25ft. UL Hose, Regulator, Stand, Striker

Heat-Up Torch Kit (CSA Certified) Contains;
PRT-01 Torch, (180,000 btuh), 34″OAL With 25ft. UL Hose, Regulator, Stand, Striker

Detail Torch Kit (CSA Certified) Contains;
PRT-02 Torch, (200,000 btuh), 21″OAL With 25ft. UL Hose, Regulator, Stand, Striker

rothenberger torches

MAGNUM

magnum le-100 torch kit roofers roofingLE-100 (#3477)
Comes with:
16″ Long Brass Torch Handle w/ 50mm Electronic Nozzle
(500,000 BTU)
33′ U/L listed LP Gas Hose
U/L listed Regulator
Swivel Hose Connector
Safety Stand
Magnum ce-100 torch kitCE-100 (#3478)
Comes with:
16″ Long Brass Torch Handle w/50mm Electronic Nozzle
(500,000 BTU)
10″ Medium Detail Brass Torch Handle w/30mm Standard Nozzle
(105,000 BTU)
33′ U/L listed LP Gas Hose
U/L listed Regulator
Swivel Hose Connector
Safety Stand
Striker
magnum s-30 torch kit roofers roofingS-30 (#3476)
Comes with:
10″ Medium Detail Brass Torch Handle w/30mm Standard Nozzle
(105,000 BTU)
33′ U/L listed LP Gas Hose
U/L listed Regulator
Swivel Hose Connector
Safety Stand

We also carry accessories/replacement parts such as:
MAG 60 Swivel End Fitting, MAG 02 Pilot Assembly, MAG 03 Flame Assembly, Trowels, Heads and Orifices.

We also carry other brands such as PrimeGrip, Tiger, Nordic, Exact…

FLAGRO LIQUID BURNERS 300,000 TO 3,000,000 BTU’s

Flagro Well Type Liquid Burner torches roofing roofers

Well Type Liquid Burners
• Designed for Tar Kettle Applications
• Formed with heavy duty sch 80 steel pipe coil
T2 Series for use  with up to 4″ Flues
FT5 Series for use  with up to 6″ Flues
 Part No.        BTU
FT2-3          300,000
FT2-5         500,000
FT2-7        700,000
FT2-9         900,000
FT5-10      1,000,000
FT5-15      1,500,000
FT5-20      2,000,000

flagro straight liquid burner torches roofing roofers

 

Straight Liquid Burners
• Formed with heavy duty sch 80 steel pipe coil to ensure long life of the burner
• Typical uses:  Asphalt melters, Crop dryers, High pressure water heaters
Part No.        BTU
FT1-3         300,000
FT1-5         500,000
FT1-7         700,000
FT1-9         900,000
FT4-10      1,000,000
  FT4-15      1,500,000
FT4-20      2,000,000

Flagro FT6 Liquid Torch roofers roofing

 

Liquid Torches

• Ideal torch where high output is required
• Allows full use of fuel in propane cylinder
• T6 Series provided with 2ft handle
• FT8 Series provided with 4ft handle
Part No.        BTU
FT6-3         300,000
FT6-5         500,000
FT6-7         700,000
FT6-9         900,000
FT8-10      1,000,000
FT8-15      1,500,000
FT8-20      2,000,000

Click here for Parts List For FT Torches and Burners.

 

PRIMEGRIP TORCHES

72-406 copy RS

  • Torch Regulator — 88-105 — Stock#3883
88-100
  •  Torch Handle — 88-100 — Stock #3882
  • 72-204 RS
  • Rolled Materials Hook — 72-204 — Stock #3816
  • 72-404 copy RS

    Steel Torch Necks

    • 5″ — 88-107 — Stock #3884
    • 10″ — 88-108 — Stock #3885
    • 24″ — 88-109 — Stock #3886Titanium Torch Necks
    • 5″ — 88-125 — Stock #4809
    • 15″ — 88-126 — Stock #4816
    • 20″ — 88-128 — Stock#4818
    • 24″ — 88-127 — Stock #4817

    72-4xx copy resize

    Steel Torch Heads

    • 35mm Mini, 210K BTU — 88-120 — Stock #3887
    • 45mm, 210K BTU — 88-121 — Stock #3888
    • 55mm, 350K BTU — 88-122 –Stock #3889
    • 65mm, 520K BTU — 88-123 — Stock #3890

    Titanium Torch Heads

    • 50mm, 150K BTU — 88-300 — Stock #4806
    • 60mm, 250K BTU — 88-301 — Stock #4807
    • 70mm, 500K BTU — 88-302 — Stock #4808

     

    We also carry FIRE EXTINGUISHERS in 3 SIZES: 10lb and 20 lb Chemical, 30lb Water.

    fire extinguishers torches roofing roofers

     

    torches

    hoses for torchesVisit our Showroom in Burnaby to view our large selection of HOSES. 

    We can ship ALL ACROSS CANADA: Vancouver Island, Nanaimo, Victoria, Campbell River, Sooke, Parksville, Coombs, Lower Mainland, Greater Vancouver (Burnaby, Coquitlam, Port Coquitlam, Port Moody, Lion’s Bay, Langley, Ladner, Tsawwassen, Surrey, New Westminster, Delta, North Vancouver, West Vancouver),
    Squamish, Chilliwack, Abbotsford, Muskoka, Garden Bay, Sunshine Coast, Pemberton, Whistler, Kelowna… Alberta, Manitoba, Saskatchewan, Quebec, Ontario, Nova Scotia, Newfoundland, Yukon, Northwest Territories…
    We also have distribution warehouses in: Vancouver (BC), Calgary (AB),
    Edmonton (AB), Saskatoon (SK), Regina (SK), Winnipeg (MB), Mississauga (ON), Montreal (QC)